Difference between revisions of "Bridge and Culvert Inventory Markers"
(Updated and corrected Beaverton section) |
(Added state inventory marker information and images) |
||
| Line 2: | Line 2: | ||
== State Highways == | == State Highways == | ||
| + | [[File:Odot-bridge-inventory-marker-examples.png|258px|thumb]] | ||
=== Bridge Inventory Markers === | === Bridge Inventory Markers === | ||
| − | + | By 2001, ODOT started placing standardized inventory markers at some bridges and overpasses. ODOT's logo is at the top, with a phone number underneath it. Information about the bridge — route number, highway number, milepoint, and ODOT bridge number — is placed in the middle, with the name of the feature being crossed below that. | |
| − | + | The phone numbers on the marker are included as a public safety service. Numbers currently documented include: | |
| − | + | * 503-378-2299: 24/7 ODOT Dispatch Center | |
| + | * 503-283-5859: ODOT Region 1 (Portland Metro Area) Dispatch Center | ||
| + | * 503-362-0457: ODOT Region 2 (NW Oregon) Dispatch Center | ||
| + | |||
| + | These numbers have not yet been documented, but correspond to other regional dispatch centers: | ||
| + | |||
| + | * 541-858-3103: ODOT Region 3 (Southern Oregon) Dispatch Center | ||
| + | * 541-383-0121: ODOT Regions 4 & 5 (Central & Eastern Oregon) Dispatch Center | ||
| + | |||
| + | Some variations exist in the design of these inventory markers, likely as a result of the contractors used on various projects. The "ODOT" in the ODOT logo used to be in Helvetica, but has changed typeface in recent years. All other text is in FHWA Series B, though often times it is condensed even more to fit additional information. The letters used to be in all caps; however, the intersecting feature text can sometimes be found in mixed case, such as in markers along the [[Oregon Route 18|Newberg-Dundee Bypass]]. Milepoints are usually to two decimal points, though some markers exist with only a single decimal point. Interstate routes are displayed with an "I-" in front of the number; by comparison, US and state routes are usually not prefixed by "US" or "OR". The text in the intersecting feature section is usually centered, but can sometimes also be left-aligned. | ||
| + | |||
| + | While many of ODOT's inventory markers legibly display correct information, quite a few do not: | ||
| + | |||
| + | * Some markers place the highway number in the "RTE" section and vice versa – for example, the marker at Mills Bridge on [[Oregon Route 6|OR-6]] displays Route 37 and Highway #6 | ||
| + | * Some markers display the wrong route number – for example, the marker on [[Oregon Route 202|OR-202]] across Beneke Creek erroneously displays [[Oregon Route 47|OR-47]] in the "RTE" section | ||
| + | * Some markers on unsigned or formerly-unsigned state routes place the route number in the "RTE" section, but place a condensed abbreviation of the highway name in "HWY" – for example, markers on [[Oregon Route 103|OR-103]] display "Fishhawk F" in illegibly-small condensed Type B | ||
| + | * Some markers display a non-existent route – for example, markers on [[Oregon Route 194|OR-194]] erroneously state they are on "US-51" | ||
| + | * Some markers display redundant information – for example, some markers on OR-18 display the highway number and/or milepoint inside the intersecting feature section in addition to their usual spots | ||
| + | |||
| + | <gallery widths="180px" heights="120px" class="center"> | ||
| + | 2016-08-13_state-inventory-marker_3219.jpg|Bridge inventory marker for the I-5 bridge over a Santiam River overflow near the Santiam Rest Area, 2016 | ||
| + | 2017-09-23_state-inventory-marker_1749.jpg|Bridge inventory marker for the OR-18 bridge over an unnamed creek near Dundee, 2017 | ||
| + | 2018-01-06_state-inventory-marker_5371.jpg|Bridge inventory marker for the SE Parks Road bridge over OR-18 near Dundee, 2018 | ||
| + | 2018-01-06_state-inventory-marker_5969.jpg|Bridge inventory marker for the OR-18 bridge over an equipment pass near Dundee, 2018 | ||
| + | 2018-02-25_state-inventory-marker_6359.jpg|Bridge inventory marker for the OR-18 bridge over College and River Streets in Newberg, 2018 | ||
| + | 2018-04-03_state-inventory-marker_9400.jpg|Bridge inventory marker for Mills Bridge on OR-6 over the Wilson River near Tillamook, 2018 | ||
| + | 2018-04-03_state-inventory-marker_9669.jpg|Bridge inventory marker for the US-101 bridge over the Wilson River in Tillamook, 2018 | ||
| + | 2020-04-19_state-inventory-marker_7479.jpg|Bridge inventory marker for the original Tide Creek Bridge on former US-30 in Columbia County, 2020 | ||
| + | 2020-04-26_state-inventory-marker_8180.jpg|Bridge inventory marker for the OR-202 bridge over Beneke Creek in Jewell, 2020 | ||
| + | 2021-04-18_state-inventory-marker_0850.jpg|Bridge inventory marker for the Black Bridge on US-26 over the Necanicum River near Cannon Beach Junction, 2021 | ||
| + | </gallery> | ||
| + | |||
| + | <br clear="all" /> | ||
| + | |||
| + | [[File:Odot-culvert-marker-examples.png|200px|thumb]] | ||
| + | === Culvert and Stormwater Facility Markers === | ||
| + | |||
| + | Around 2013, ODOT started placing standardized markers at culverts and stormwater facilities. For culverts, two types of markers are defined in [https://www.oregon.gov/ODOT/Engineering/202001/RD398.pdf ODOT Standard Drawing RD398], aptly named Type 1 and Type 2. | ||
| + | |||
| + | * '''Type 1''' markers are 4″ × 6–12″ strips of green thermoplastic tape affixed to the road, with no other information added. | ||
| + | * '''Type 2''' markers are 3½″ × 13¼″ white panels with a green stripe at the top. "ODOT" appears above the stripe. A number appears below the stripe — either the Drainage Facility ID (or "DFI number") if the culvert span is less than 6 feet, or the Bridge Structure ID if the culvert span is between 6 and 20 feet. Below the number is the culvert milepoint. All text on the marker is FHWA Series C, called "Type C font" in the drawing. | ||
| + | |||
| + | Stormwater facilities have three types of markers defined in [https://www.oregon.gov/ODOT/Engineering/202001/RD399.pdf ODOT Standard Drawing RD399], named Type S1, S2 and S3. | ||
| + | |||
| + | * '''Type S1''' markers are flexible plastic posts embedded into the ground in two colors, red and green. Red posts signify the start of a stormwater facility maintenance area, and green posts signify the end of the maintenance area. Dimensions are the same as [https://www.oregon.gov/odot/engineering/202007/TM570.pdf ODOT TM570 Type 2 flexible plastic posts], but these omit the 4″ reflective sheeting bands. No other information is added to these posts. | ||
| + | * '''Type S2''' markers are the same size as the Type 2 culvert markers above, and have a similar design. A Type S2's top color band is blue instead of green, and the milepoint is replaced by a 5″ × ¼″ black stripe which can be optionally turned into an arrow to indicate the direction or location of the stormwater facility. Otherwise, both Type 2 and Type S2 display the same information. | ||
| + | * '''Type S3''' markers are essentially DFI numbers stamped onto access covers like manholes and vaults to identify underground stormwater facilities. For durability, ink is not used. | ||
| + | |||
| + | ODOT appears to have used other types of markers to identify and locate culverts and stormwater facilities before; however, their usage appears to be limited, and not much information is known about them: | ||
| + | |||
| + | * A section of [[Oregon Route 224|OR-224]] from roughly Carver to Barton has small yellow markers with the milepoint in black FHWA Series C text and a reflective blue circle below. These appear to mark the locations of culverts or other drainage facilities. The milepoints correspond to the mileage along the Clackamas Highway #171. | ||
| + | * A section of [[Oregon Route 221|OR-221]] south of Dayton has small, narrow green markers at locations of culverts. A circular ODOT logo is on top with sections below for other information about the culvert, including milepoint, kilometerpoint, diameter in inches, length in feet, type, description, and reference point in feet. An Oregon Utility Notification Center "Stop - Call Before You Dig!" logo is at the bottom. Curiously, many of these markers omit all information except the description (usually "CULVERT"). Other state highways in the area may also have these markers. | ||
| + | |||
| + | <gallery widths="180px" heights="120px" class="center"> | ||
| + | 2021-05-28_state-stormwater-marker_1434.jpg|A Type S2 stormwater facility inventory marker at the northern terminus of OR-127 near Linnton, 2021 | ||
| + | 2021-07-10_odot-yellow-culvert-marker_3741.jpg|A yellow culvert marker on OR-224 between Carver and Barton, 2021 | ||
| + | 2018-03-30_state-culvert-marker_6716.jpg|A green culvert marker on OR-221 south of Dayton, 2018 | ||
| + | </gallery> | ||
| + | |||
| + | <br clear="all" /> | ||
== County Roads == | == County Roads == | ||
Revision as of 01:07, 14 July 2021
Bridge and Culvert Inventory Markers are signs that identify bridges and culverts for jurisdictional maintenance purposes and occasionally to assist the travelling public. Oregon has placed inventory markers on bridges since around the year 2000, but some counties and cities have used them in decades prior.
Contents
State Highways
Bridge Inventory Markers
By 2001, ODOT started placing standardized inventory markers at some bridges and overpasses. ODOT's logo is at the top, with a phone number underneath it. Information about the bridge — route number, highway number, milepoint, and ODOT bridge number — is placed in the middle, with the name of the feature being crossed below that.
The phone numbers on the marker are included as a public safety service. Numbers currently documented include:
- 503-378-2299: 24/7 ODOT Dispatch Center
- 503-283-5859: ODOT Region 1 (Portland Metro Area) Dispatch Center
- 503-362-0457: ODOT Region 2 (NW Oregon) Dispatch Center
These numbers have not yet been documented, but correspond to other regional dispatch centers:
- 541-858-3103: ODOT Region 3 (Southern Oregon) Dispatch Center
- 541-383-0121: ODOT Regions 4 & 5 (Central & Eastern Oregon) Dispatch Center
Some variations exist in the design of these inventory markers, likely as a result of the contractors used on various projects. The "ODOT" in the ODOT logo used to be in Helvetica, but has changed typeface in recent years. All other text is in FHWA Series B, though often times it is condensed even more to fit additional information. The letters used to be in all caps; however, the intersecting feature text can sometimes be found in mixed case, such as in markers along the Newberg-Dundee Bypass. Milepoints are usually to two decimal points, though some markers exist with only a single decimal point. Interstate routes are displayed with an "I-" in front of the number; by comparison, US and state routes are usually not prefixed by "US" or "OR". The text in the intersecting feature section is usually centered, but can sometimes also be left-aligned.
While many of ODOT's inventory markers legibly display correct information, quite a few do not:
- Some markers place the highway number in the "RTE" section and vice versa – for example, the marker at Mills Bridge on OR-6 displays Route 37 and Highway #6
- Some markers display the wrong route number – for example, the marker on OR-202 across Beneke Creek erroneously displays OR-47 in the "RTE" section
- Some markers on unsigned or formerly-unsigned state routes place the route number in the "RTE" section, but place a condensed abbreviation of the highway name in "HWY" – for example, markers on OR-103 display "Fishhawk F" in illegibly-small condensed Type B
- Some markers display a non-existent route – for example, markers on OR-194 erroneously state they are on "US-51"
- Some markers display redundant information – for example, some markers on OR-18 display the highway number and/or milepoint inside the intersecting feature section in addition to their usual spots
Bridge inventory marker for the I-5 bridge over a Santiam River overflow near the Santiam Rest Area, 2016
Bridge inventory marker for the OR-18 bridge over an unnamed creek near Dundee, 2017
Bridge inventory marker for the SE Parks Road bridge over OR-18 near Dundee, 2018
Bridge inventory marker for the OR-18 bridge over an equipment pass near Dundee, 2018
Bridge inventory marker for the OR-18 bridge over College and River Streets in Newberg, 2018
Bridge inventory marker for Mills Bridge on OR-6 over the Wilson River near Tillamook, 2018
Bridge inventory marker for the US-101 bridge over the Wilson River in Tillamook, 2018
Bridge inventory marker for the original Tide Creek Bridge on former US-30 in Columbia County, 2020
Bridge inventory marker for the OR-202 bridge over Beneke Creek in Jewell, 2020
Bridge inventory marker for the Black Bridge on US-26 over the Necanicum River near Cannon Beach Junction, 2021
Culvert and Stormwater Facility Markers
Around 2013, ODOT started placing standardized markers at culverts and stormwater facilities. For culverts, two types of markers are defined in ODOT Standard Drawing RD398, aptly named Type 1 and Type 2.
- Type 1 markers are 4″ × 6–12″ strips of green thermoplastic tape affixed to the road, with no other information added.
- Type 2 markers are 3½″ × 13¼″ white panels with a green stripe at the top. "ODOT" appears above the stripe. A number appears below the stripe — either the Drainage Facility ID (or "DFI number") if the culvert span is less than 6 feet, or the Bridge Structure ID if the culvert span is between 6 and 20 feet. Below the number is the culvert milepoint. All text on the marker is FHWA Series C, called "Type C font" in the drawing.
Stormwater facilities have three types of markers defined in ODOT Standard Drawing RD399, named Type S1, S2 and S3.
- Type S1 markers are flexible plastic posts embedded into the ground in two colors, red and green. Red posts signify the start of a stormwater facility maintenance area, and green posts signify the end of the maintenance area. Dimensions are the same as ODOT TM570 Type 2 flexible plastic posts, but these omit the 4″ reflective sheeting bands. No other information is added to these posts.
- Type S2 markers are the same size as the Type 2 culvert markers above, and have a similar design. A Type S2's top color band is blue instead of green, and the milepoint is replaced by a 5″ × ¼″ black stripe which can be optionally turned into an arrow to indicate the direction or location of the stormwater facility. Otherwise, both Type 2 and Type S2 display the same information.
- Type S3 markers are essentially DFI numbers stamped onto access covers like manholes and vaults to identify underground stormwater facilities. For durability, ink is not used.
ODOT appears to have used other types of markers to identify and locate culverts and stormwater facilities before; however, their usage appears to be limited, and not much information is known about them:
- A section of OR-224 from roughly Carver to Barton has small yellow markers with the milepoint in black FHWA Series C text and a reflective blue circle below. These appear to mark the locations of culverts or other drainage facilities. The milepoints correspond to the mileage along the Clackamas Highway #171.
- A section of OR-221 south of Dayton has small, narrow green markers at locations of culverts. A circular ODOT logo is on top with sections below for other information about the culvert, including milepoint, kilometerpoint, diameter in inches, length in feet, type, description, and reference point in feet. An Oregon Utility Notification Center "Stop - Call Before You Dig!" logo is at the bottom. Curiously, many of these markers omit all information except the description (usually "CULVERT"). Other state highways in the area may also have these markers.
A Type S2 stormwater facility inventory marker at the northern terminus of OR-127 near Linnton, 2021
A yellow culvert marker on OR-224 between Carver and Barton, 2021
A green culvert marker on OR-221 south of Dayton, 2018
County Roads
Not all counties place inventory markers on their bridges or at their culverts.
Clatsop County
Clatsop County marks its bridges with a small rectangular inventory marker placed on the bridge itself. These markers display the bridge name, ODOT bridge number, Clatsop County bridge number, and the milepoint in white FHWA Series B text on a green background. They also have a "Clatsop County" stamp on them, similar to mileposts placed on county roads around 2015.
In addition, Clatsop County places street sign blade-sized signs at the bridge itself, mounted on a taller post presumably for motorist assistance. These signs display the waterway name in large text, with the Clatsop County bridge number and bridge name below it in much smaller lettering. All text on this sign is in FHWA Series B. Like the 2015-era mileposts, these also have "Clatsop County" stamped in them, as well as the date of installation written on them in permanent marker; for example, the sign at Humbug Creek was installed in October 2012.
At culverts, Clatsop County uses green wickets with an orange reflective square and the milepoint below in hundredths of a mile, without identifying any sort of road name or number. The typeface used is a thinner stroke version of Helvetica Inserat Roman.
A bridge inventory marker for the Humbug Bridge over Humbug Creek on Lower Nehalem Road, 2021
A bridge sign for the Humbug Bridge over Humbug Creek on Lower Nehalem Road, 2021
A green wicket culvert marker at MP 9.02 on Lower Nehalem Rd., 2014
Linn County
Linn County places inventory markers on its bridges that displays information like road number, milepoint, bridge number, road name and body of water crossed. These usually appear on both sides of the bridge and use some form of Helvetica for the typeface.
A bridge inventory marker at MP 1.16 on Hofer Road, 2016
A bridge inventory marker at MP 0.15 on Higbee Road, 2016
Tillamook County
Tillamook County places blue inventory markers on bridges it maintains which list the bridge name, the county bridge number (including the county road number in the first segment), the ODOT bridge number, and the body of water being crossed. All text on the markers is in FHWA Series B. While it isn't known at this time when these markers were placed, their reflective background suggests they may have been placed around the same time as the newer reflective mileposts used on county roads since around 2015.
A bridge inventory marker for the Cronin Creek Bridge on Foss Road, 2021
A bridge inventory marker for the Salmonberry Bridge over the Salmonberry River on Foss Road, 2021
A bridge inventory marker for the CCC Bridge over the Nehalem River on Foss Road, 2021
Washington County
Washington County marks most of its bridges and culverts with markers similar to county road identifiers on mileposts, with the word "ROAD" replaced with "BRIDGE" or "CULVERT" appropriately. The numerals are larger than the road markers, and the legend text appears to be less condensed. Numerals are in Series B, C or D. No other mileage or route identification information can be found on these markers. A newer version of this marker was placed on the Scholls Ferry Road bridge over the Tualatin River when it was replaced in 2008.
A Washington County bridge marker on Cochran Road near Reehers Camp, 2019
City Roads
Beaverton
The City of Beaverton has placed at least two different versions of small green markers at its bridges. The legend at the top of both versions says "Beaverton Bridge" in FHWA Series B. Below there:
- One (possibly older) version has the City of Beaverton's centennial seal in the middle, with a white box below containing a green "BB-" (presumably for "Beaverton Bridge") and the bridge number in FHWA Series B.
- Another (possibly newer) version has the City of Beaverton's logo in the middle (omitting the "Oregon") with the bridge number in white FHWA Series C lettering below.
In addition, Beaverton places similar markers at its culverts. These markers have the design of the "newer" bridge markers, with "BC" (presumably for "Beaverton Culvert") on top and the city logo in the middle. Unlike the bridge markers, these ones keep the word "Oregon" in the logo. The culvert number is also larger on these markers than the bridge markers, and is in FHWA Series D.
A Beaverton bridge inventory marker with city logo on Hall Blvd., 2021
A Beaverton bridge inventory marker with city seal on Broadway, 2021
A Beaverton culvert inventory marker with city logo on SW Griffith Dr., 2021
Portland
The City of Portland's Bureau of Transportation (PBOT) places inventory markers on many bridges it maintains. These markers feature the logo of either PBOT or its predecessor, the Portland Office of Transportation (PDOT), along with the city's phone number, the road name, the feature it crosses, and a bridge identifier (likely its ODOT number). All text is either FHWA Series B or Series C, aside from the PBOT/PDOT logo which uses condensed versions of both Britannic and Britannic Bold.
In addition, the city's Bureau of Environmental Services (PBES) places markers at culverts. These are white markers with the long edge oriented horizontally. At the top is a blue "City of Portland" in an as-yet unidentified serif font (represented by Goudy Old Style in the example). The PBES logo and city's phone number are on the bottom in the same shade of blue as the "City of Portland" text above. In the middle is presumably the name and some sort of identifier in black Helvetica Bold text.
A PDOT bridge inventory marker on N Portland Road near St. Johns, 2015
A PBES culvert inventory marker near Kelley Point, 2014
