Difference between revisions of "Bridge and Culvert Inventory Markers"

From Beaver State Roads
Jump to navigation Jump to search
(Added Portland bridge inventory marker information)
(Added Beaverton bridge and culvert markers)
Line 69: Line 69:
 
== City Roads ==
 
== City Roads ==
  
−
{{UnderConstruction|part=section}}
+
[[File:Mp-city-beaverton-bridge-culvert-examples.png|126px|thumb]]
 +
=== Beaverton ===
  
−
=== Beaverton ===
+
The City of Beaverton places small green markers at bridges and culverts. The legend at the top says either "BB" or "BC" (presumably for "Beaverton bridge" or "Beaverton culvert"), the middle contains the City of Beaverton logo, and the bottom shows the city bridge or culvert number. The legend and bridge/culvert number is in FHWA Series D.
  
−
Coming soon.
+
<br clear="all" />
  
 
[[File:Mp-city-portland-bridge.png|60px|thumb]]
 
[[File:Mp-city-portland-bridge.png|60px|thumb]]

Revision as of 23:17, 3 July 2021

Bridge and Culvert Inventory Markers are signs that identify bridges and culverts for jurisdictional maintenance purposes and occasionally to assist the travelling public. Oregon has placed inventory markers on bridges since around the year 2000, but some counties and cities have used them in decades prior.

State Highways

Bridge Inventory Markers

Culvert Markers

County Roads

Not all counties place inventory markers on their bridges or at their culverts.

Mp-county-clatsop-bridge-examples.png

Clatsop County

Clatsop County marks its bridges with a small rectangular inventory marker placed on the bridge itself. These markers display the bridge name, ODOT bridge number, Clatsop County bridge number, and the milepoint in white FHWA Series B text on a green background. They also have a "Clatsop County" stamp on them, similar to mileposts placed on county roads around 2015.

In addition, Clatsop County places street sign blade-sized signs at the bridge itself, mounted on a taller post presumably for motorist assistance. These signs display the waterway name in large text, with the Clatsop County bridge number and bridge name below it in much smaller lettering. All text on this sign is in FHWA Series B. Like the 2015-era mileposts, these also have "Clatsop County" stamped in them, as well as the date of installation written on them in permanent marker; for example, the sign at Humbug Creek was installed in October 2012.

At culverts, Clatsop County uses green wickets with an orange reflective square and the milepoint below in hundredths of a mile, without identifying any sort of road name or number. The typeface used is a thinner stroke version of Helvetica Inserat Roman.

  • A bridge inventory marker for the Humbug Bridge over Humbug Creek on Lower Nehalem Road, 2021

  • A bridge sign for the Humbug Bridge over Humbug Creek on Lower Nehalem Road, 2021

  • A green wicket culvert marker at MP 9.02 on Lower Nehalem Rd., 2014


Mp-county-linn-bridge.png

Linn County

Linn County places inventory markers on its bridges that displays information like road number, milepoint, bridge number, road name and body of water crossed. These usually appear on both sides of the bridge and use some form of Helvetica for the typeface.

  • A bridge inventory marker at MP 1.16 on Hofer Road, 2016

  • A bridge inventory marker at MP 0.15 on Higbee Road, 2016


Mp-county-tillamook-bridge.png

Tillamook County

Tillamook County places blue inventory markers on bridges it maintains which list the bridge name, the county bridge number (including the county road number in the first segment), the ODOT bridge number, and the body of water being crossed. All text on the markers is in FHWA Series B. While it isn't known at this time when these markers were placed, their reflective background suggests they may have been placed around the same time as the newer reflective mileposts used on county roads since around 2015.

  • A bridge inventory marker for the Cronin Creek Bridge on Foss Road, 2021

  • A bridge inventory marker for the Salmonberry Bridge over the Salmonberry River on Foss Road, 2021

  • A bridge inventory marker for the CCC Bridge over the Nehalem River on Foss Road, 2021


Mp-county-washington-bridge-culvert.png

Washington County

Washington County marks most of its bridges and culverts with markers similar to county road identifiers on mileposts, with the word "ROAD" replaced with "BRIDGE" or "CULVERT" appropriately. The numerals are larger than the road markers, and the legend text appears to be less condensed. Numerals are in Series B, C or D. No other mileage or route identification information can be found on these markers. A newer version of this marker was placed on the Scholls Ferry Road bridge over the Tualatin River when it was replaced in 2008.

  • A Washington County bridge marker on Cochran Road near Reehers Camp, 2019


City Roads

Mp-city-beaverton-bridge-culvert-examples.png

Beaverton

The City of Beaverton places small green markers at bridges and culverts. The legend at the top says either "BB" or "BC" (presumably for "Beaverton bridge" or "Beaverton culvert"), the middle contains the City of Beaverton logo, and the bottom shows the city bridge or culvert number. The legend and bridge/culvert number is in FHWA Series D.


Mp-city-portland-bridge.png

Portland

The City of Portland places inventory markers on many bridges it maintains. These markers feature the logo of either the Portland Bureau of Transportation (PBOT) or its predecessor, the Portland Office of Transportation (PDOT), along with the bureau's phone number, the road name, the feature it crosses, and a bridge identifier (likely its ODOT number). All text is either FHWA Series B or Series C, aside from the PBOT/PDOT logo which uses condensed versions of both Britannic and Britannic Bold.

  • A PDOT bridge inventory marker on N Portland Road near St. Johns, 2015


Retrieved from "http://wiki.beaverstateroads.org/index.php?title=Bridge_and_Culvert_Inventory_Markers&oldid=407"